How To Set Clock In 2008 Acura Tsx

The 2008 Acura TSX has a built-in clock that can be adjusted to the correct time. To set the clock, press and hold the “CLOCK” button on the instrument panel until the settings screen appears. Use the “H” and “M” buttons to adjust the hour and minute, respectively. Press the “CLOCK” button again to exit the settings screen.

4 Steps to Set Clock In 2008 Acura Tsx

There is no specific way to set the clock in a 2008 Acura TSX. The best way to ensure that the clock is set correctly is to use the GPS navigation system. If the vehicle is not equipped with a GPS navigation system, the clock can be set manually by pressing the clock button on the instrument panel and following the prompts.

In order to maintain the correct time, it is important to know how to set the clock in your car. The process for setting the clock in a 2008 Acura TSX is relatively simple and only requires a few steps. By following these steps, you can ensure that your clock is always accurate.

Step 1: The Clock Can Be Set Manually Or Automatically

The clock in the 2008 Acura TSX can be set either manually or automatically. To set the clock automatically, simply press the “Clock” button on the touch screen control panel and then select the “Auto Set” option. The clock will automatically adjust itself based on the current time zone. To set the clock manually, press the “Clock” button and then use the touch screen control panel to select the “Manual Set” option. Use the plus and minus buttons to adjust the

Step 2: The Clock Is Located In The Center Of The Instrument Panel

In order to set the clock in your 2008 Acura TSX, first locate the clock on the instrument panel. It should be located in the center of the panel. Once you have found the clock, use the knob on the right side of the clock to set the time.

Step 3: The Time Can Be Displayed In 12 Or 24 Hour Format

The time can be displayed in 12 or 24 hour format. To change the time display, press the CLOCK button until the desired time format is displayed.

Step 4: The Date Can Be Displayed In Either Day/Month Or Month/Day Format

The date can be displayed in either day/month or month/day format. To change the format, press and hold the “DISP” button for about 5 seconds. The day/month format will be displayed first, followed by the month/day format.

Frequently Asked Questions

Why Is My Acura Clock Wrong?

The clock on Acuras is often inaccurate, and there is no real known fix for it. The problem is thought to be with the car’s battery, as the clock resets when the car is turned off. Some people have had luck fixing the problem by disconnecting the car’s battery for a few minutes and then reconnecting it, but this is not a guaranteed fix.

How Do You Set The Clock On A 2008 Acura?

There are a few ways to set the clock on a 2008 Acura. The first way is to use the steering wheel controls. The second way is to use the touch screen. The third way is to use the buttons on the clock.

How Do I Reset The Time On My Acura?

I’m sorry, I don’t know how to reset the time on an Acura.

In Closing

Setting the clock in your 2008 Acura TSX is a relatively simple process. First, find the fuse box under the hood of your car. Open the fuse box and locate the fuse labeled “CLOCK.” Pull the fuse out and replace it with one that has the same amperage rating. Next, open the driver’s side door and find the clock on the dashboard. Use the arrow buttons to set the time and date. Once you have finished, put the key in the ignition and turn it to the “ACC” position. Press the “CLOCK” button on the dashboard to save your settings.

Leave a Comment