The Best Ptp Wireless Bridge To Buy

A wireless bridge is a networking device that allows two or more Ethernet-enabled devices to communicate with each other wirelessly. Bridges are used to extend the range of a network, as well as to connect two different networks together.

Which Are The Best Ptp Wireless Bridge From Our Choice

If you don’t have enough time, check out this shortlist of the best ptp wireless bridge and choose the one you like the most.

10 Best Ptp Wireless Bridge You Should Consider In 2022

Bestseller No. 1
TP-Link 2.4GHz N300 Long Range Outdoor CPE for PtP and PtMP Transmission | Point to Point Wireless Bridge | 9dBi, 5km+ | Passive PoE Powered w/ Free PoE Injector | Pharos Control (CPE210)
  • Built in 9dBi 2x2 dual polarized directional MIMO antenna
  • Adjustable transmission Power from 0 to 27dBm/500mW. Power Consumption: 10.5 Watts Max, Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable
  • System level optimizations for more than 5km long-range wireless transmission (only for paired Point-to-Point or Point-to-MultiPoint transmission)
  • TP Link Pharos tdma (Time Division Multiple Access) technology improves product Performance in throughput, Capacity and latency Performance
  • Centralized management system Pharos Control
Bestseller No. 2
KuWFi 2-Pack 300Mbps Wireless Bridges, Wireless Outdoor CPE WiFi Bridge Kit Point to Point Wireless Access Point 2.4G Internet Bridge 1KM Transmission Distance Solution for PTP/PTMP(Pre-Program)
  • 【What CPE120 is】KuWFi CPE120 is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor ethernet bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
  • 【Multiple operation mode, for different network environment】 Point to Point/Multi-Point(1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to internet bridge CPE120’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to this give you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR
  • 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless ethernet bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance, for building to building wireless wifi bridge
  • 【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
  • 【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi line of sight wifi bridge and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND
Bestseller No. 3
5.8G Wireless Bridge PTMP WiFi PTP Point to Point Long Range Outdoor Wireless Access Point Extender Network CPE 2KM Transmission Distance with 12DBi Antenna 2 LAN 100MBps 24V PoE Power Supply 2 Pack
  • Bluedery CPE220 network bridge is a 5.8G Long Range WiFi Extender Outdoor WiFi ethernet bridge with a digital display. It complies with the 802.11a and 802.11n, standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.
  • PTMP Pre-programmed: The installation of this WiFi outdoor extender aka long range outdoor wireless access point extender is very simple. Simply connect the both bridges to PoE adapters through the ethernet cables, system will power on, and wait for 1 minute for the both equipment to pair and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired successfully.
  • Using 5.8G / 100Mbps wireless transmission rate between wireless ethernet bridge can support 1.2 miles transmission distance (Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
  • Long Range WiFi Extender Point to Point Mode: Connect both outdoor WiFi extender to the PoE power adapter will auto pair, no need connects to computer for the complicated configuration, at point-to-point mode can use for long range video surveillance and internet network sharing, the master bridge output WiFi hot point, you can enter password to get access, extend the WiFi access coverage up to 1.2 miles in 60 degrees angle of the front direction.
  • Point to Multiple Point Mode: suit for the video surveillance DVR system to receives the IP cameras video stream for different building or place, the master bridge connects to the DVR system, and the slave bridges connects to the IP cameras, This network bridge aka long range WiFi outdoor wireless access point extender can facilitate you manage different building's IP cameras in one system without wiring.
SaleBestseller No. 4
MokerLink WiFi Bridge, Wireless Outdoor CPE for PtP and PtMP Transmission, 5.8GHz 900Mbps 2-3KM Distance, with PoE Adapter, 2 Ethernet Port, 2 Pack
  • This Wifi Outdoor Bridge works at 5.8Ghz band, built-in 12dbi antenna, Max 900Mbps between the bridge, support 2-3KM long-distance wireless transmission, automatically adjust the transmission power and channel, reduce signal interference, make wireless transmission more stable
  • The installation is very simple. It is powered by a 24V poe adapter(included) and supports dial pairing. Set one of the CPE DIP switches to H, set it host and transmit the signal; and set the other CPE switch to C, set it slave client and receive the signal; then reset, will automatically complete pairing, no other configuration required. There are two 100Mpbs Ethernet ports, the WAN port connect to the POE Adapter POE Port, the LAN port connect to the LAN device.
  • Full information LED display, include host-client mode(H or C,the number behind is the channel number), signal strength(P,a number will be displayed after the pairing is successful), IP address(A), port /wifi/power led, the F button can switch the LED display info, the S button can complete the setting, more clearly know the device status, more conducive to debugging and maintenance
  • Built-in independent hardware protection circuit and watchdog chip, when working abnormally, it will automatically restart to maintain the continuity of wireless coverage; support WEB GUI management, view operating status, support wifi analysis and configuration
  • Professional outdoor shell design, seamless molding, IP65 dustproof and waterproof, lightning protection, support PtP, PtMP(1-4); Also support one single independent use, both set at the Host mode, with complete AP function, used for wifi access, maximum support 50+ users. It can be widely used indoor and outdoor, for home, enterprise network, wireless coverage, security monitoring transmission, great for expanding your network wirelessly.
Bestseller No. 5
TP-Link 5GHz AC867 Long Range Outdoor CPE for PtP and PtMP Transmission | Point to Point Wireless Bridge | 23dBi | Passive PoE Powered w/Free PoE Injector | Pharos Control (CPE710) (Renewed)
  • 【Superior Speeds with No Wait】23 dBi Directional 2 × 2 MIMO Antenna, 256 QAM and an 80 MHz bandwidth boosts overall speeds up to 867 Mbps.
  • 【Long-Range Wireless Transmission】Excellent beam directivity, improved latency, and noise immunity makes CPE710 an ideal choice and cost-effective solution for outdoor long-distance wireless networking applications.
  • 【Stable Structural Design and Flexible Installation】Snap-lock parts make assembly simple and convenient. Pole mount kits and the freedom of three-axis alignment facilitate flexible installation. Sturdy design ensures stability in windy conditions.
  • 【Pharos Control – Centralized Management System】CPE710 comes equipped with Pharos Control centralized management software, the web-based PharOS provides an alternative management method and allows professionals to access more detailed configurations.
  • 【IP65 Weatherproof】Durable IP65 weatherproof enclosure along with 15kV ESD and 6kV lightning protection ensures all-weather suitability.
Bestseller No. 6
KuWFi 2-Pack Wireless Ethernet Bridge, Long Range WiFi Access Point 5.8G Outdoor AP CPE Kit IP65 Waterproof WiFi Bridge Point to Point Support PTP/PTMP(Pre-Program)
  • 【What KuWFi CPE200 is】an 11AC 5GHz 900Mbps wireless bridge point to point outdoor CPE Kit with ethernet port. The Wi-Fi range to up to 1KM and with LED display to configure the PT/PTMP connection, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
  • 【Multiple operation mode,suit for different network & environment】 Connect an IP Surveillance Camera to CPE200’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Cameras to the CPE200 gives you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras and networks DVR
  • 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance. It transmits via wireless WiFi, reducing the trouble of wiring cable
  • 【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
  • 【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND
SaleBestseller No. 7
5.8GHz Outdoor Wireless Bridge Point to Point Access PTP/PTMP Plug & Play CPE Network 300Mbps 1.2ML Long Range WiFi Extender with 12DBI High Gain Antenna,POE Power Adapter
  • [Point to Point Wireles Bridge]:CPE355 is a 5.8G long range wifi extender which comply with the IEEE802.11a and IEEE802.11n standards to ensure interoperability.The 5.8G wireless bridge outdoor is capble sharing internet to remote location up to 2KM(Barrier Free) and its point to point paring function save you much time and effort from complex wire setup process.It is a simple,easy and professional way for long range wireless coverage,data transmit,wireless monitoring.
  • Easy to Installation - Pre-configured CPE Kit with build in 10dBi panel antenna, the transmit/receive (point to point )wireless distance more than 1-2KM meters.suitable for long range video transmission point to point wifi cover, It support Wireless AP, Wireless Repeater, Bridge mode, default Pre-program WDS mode ,no need seting , it can work two unit at the same time , no need long cable for connect to camera with your PC
  • Long Range Transmission Distance - Up to 2km (visible unobstructed environment), actual application distance should be less than 2KM. Built-in 10DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house
  • Widely Applications - Any place required cameras Point to Point/Multi-Point connection Client Bridge for Elevator Monitornetworks. Outdoor CPE Connect an IP Wireless Camera to a secondary port and utilize its long-range connectivity to send video back through the wireless network for extended coverage
  • Built for Outdoor Wi-Fi Coverage - IP66-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold,heat or continuous moisture.Lightning Protection,Waterproof,Dustproof,Antifreeze,High-Temperature Resistant, With software-enabled PoE output,the secondary Ethernet port can power an external device,such as a PoE security camera,for seamless IP video integration
Bestseller No. 8
VSVABEFV Wireless WiFi Bridge 300Mbps 2.4G Long Range Point to Point Outdoor Waterproof CPE Router with 14 dbi High Gain Antenna Ethernet Port for PTP PTMP
  • 【wireless outdoor bridge】B400 is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display for PT/PTMP connection, AP + Bridge operation mode, more stable Support Main AP mode, slave AP mode operation mode, simple to built the PTP/PTMP connections, meet with multiple wifi transmission scheme demands.
  • 【point to point】B400 is an 300Mbps high-performance enterprise-class outdoor digital bridge that supports 802.11N technology. It operates in the 2.4G wireless band.It has unique digital tube pairing technology, no computer configuration, easy to finish point to point, point to point (less than 8 points) equipment matching.With 100M network interface.
  • 【IP65】 waterproof outdoor wireless CPE bridge kit with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, thunderstorm weather. Meantime, it adaptive to various environment, the working temperature can be normal at -40℃ to 70℃. Suit for any country.
  • 【easy to settings】Fast setting & powerful wireless optimization.The user does not need to know too much wireless knowledge, without too much professional knowledge, and can realize the pairing of point to point, point to point (within 8 points) in a few steps. Simple settings can achieve wireless optimization, and improve the quality and effectiveness of link transmission.
  • 【Customer Service】For 30 days after the date of purchase, return your undamaged product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND
Bestseller No. 9
CPE220 5.8G Wireless Bridge PTMP WiFi PTP Point to Point Access Outdoor Network CPE 2KM Transmission Distance with 12DBi High-Gain Antenna 2 LAN 100MBps Ethernet Port 24V PoE Adapter
  • GOODTHREE CPE220 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital display. It complies with the 802.11a and 802.11n,standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.
  • PTMP Pre-programmed: Out of the box, connect the 2 wireless bridges and PoE adapters through the ethernet cable for power supply, and wait for 1 minute for the "Link" green indicator to light up to indicate that they have been automatically paired succeeded(Point to Point). Suitable to extend the internet to your garage, barn, warehouse, store via wireless transmission, instead of laying out the ethernet cable.
  • Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 2KM transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
  • Extend the network to another building within 2KM through a point-to-point method. The master CPE receiver is connected to your internet through a PoE adapter, and the slave CPE transmitter is connected to the router(AP mode) or directly to the computer through a PoE adapter to expand your network/WiFi to another building, such as expand your home network to store.
  • Realize remote camera video surveillance or elevator monitoring through wireless bridge point-to-point or point-to-multipoint. The master CPE receiver is connected to a DVR, or monitor, or computer through a PoE adapter, and the slave CPE transmitter is connected to an IP Camera through a PoE adapter to expand your camera surveillance range. Reference pictures are easy to connect CPE with IP cameras & networks DVR.
Bestseller No. 10
Wireless Bridge Point to Point Outdoor,WDINLY 5KM Internet Bridge Point to Point Wireless Bridge Plug and Play PTP/PTMP (Pre-Program) 2-Pack Long Range Outdoor 5.8G WiFi Outdoor CPE Kit 2 LAN Port
  • 【What is CPE450】CPE450M is a long-range high-performance wireless bridge point to point outdoor with a data rate of 900Mbps. Compliant with IEEE 802.11b/g/n/ac standard, 27dBm RF power, 14dBi dual-polarized high-gain antenna, PTP/PTMP distance over 5000 meters. Equipped with AP+Bridge operation mode. Point-to-point Pre-Pairing,no need to access the web interface to setup avoid the complex setup program so that save much human work and make the long-range wireless coverage, data it can work two unit at the same time , no need long cable for connect to camera with your PC Bridge
  • 【Working mode classification】wireless bridge router Supports wireless AP and wireless bridge operation modes for PTP/PTMP connection; 900Mbps Pre-configured CPE Kit build in 14dBi panel antenna, the transmit/receive (point to point )wireless distance more than 5KM meters wireless bridge with ethernet port can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access. And Point to Multi-Point connection extended camera Monitoring range Easy to set wifi bridge with IP cameras with DVR or WiFi Coverage
  • 【5.8G technology is stronger】The 5.8G frequency of the outdoor wireless WiFi bridge makes the long-distance wireless bridge router have better anti-interference performance, good compatibility, and strong anti-adjacent channel interference, which is better than 2.4G traditional CPE. ABS waterproof, dustproof and sun protection shell, temperature adaptive; supports 24V PoE, ESD protection and surge protection at the same time, ideal for outdoor use; Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
  • 【Built for Outdoor Wi-Fi Coverage】 IP66-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture. Lightning Protection, Waterproof, Dustproof, Antifreeze, High-Temperature Resistant, With software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration,suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access. Like Warehouses, barns, shops, garages, ranches, mainly used to achieve long-distance IP camera signal connection;
  • 【how to use wireless Bridge 】The WDINLY ethernet wifi bridge pairing can be done by dialing without having to access the GUI, to give you a full plug and play bridge, If installed in a high place is not convenient to take down can be selected by logging into the web interfaceto chooseworking mode (AP + Repetaer) pairing , if have any qustions please feel free to contact us. We will do our best to help you. GET 100% SATISFACTION.

Things To Consider Before Buying The Best Ptp Wireless Bridge

Take the following considerations into account to choose the best ptp wireless bridge that meets your needs.

The best wireless bridge for your ptp would be something that was up to date with the latest technologies and had excellent reviews. If you were looking for a product that would allow you to connect two other devices to your service, or if you wanted to be able to hotwire other devices on top of your ptp, then a good option would be this option. If you are looking for a product that will Turning Tables software, then a wireless bridge is ideal. This item is known to provide good performance and can can be controlled through another computer as long as it is connected to the network. It is also easy to set up and once set up, you can enjoy using the product for years to come. If you are looking for a product that will allow you to access your ptp through another computer, then the best option would be a desktop bridge. This item is easy to set up and can be controlled from any where in the world. It also allows you to access your ptp using other computers from the network which is a nice bonus.

Related Frequently Asked Questions

What Is A Ptp Wireless Bridge?

A PTP wireless bridge is a wireless bridge that provideswenter Talk,data and Charging Port with an shortest possible path webbuffer. It provides an alternateroute for talking to other Wireless bridges in a network.

What Is The Disadvantage Of A P2P Wireless Bridge?

There are several advantages to using a p2p wireless bridge. First, it allows two devices to share a communication link, which is ideal for high-speed data transfers. Additionally, using a p2p wireless bridge helps reduce latency (the difference in time between two statements from two sources), which can be an advantage when transferring data quickly from one computer to another. Finally, using a p2p wireless bridge does not increase the Proxy Compliance Cost, because it does not require the presence of a proxy server.

What Is The Speed Of A P2P Wireless Bridge?

The speed of a p2p wireless bridge is the amount of time it takes for the network to connect to the bridge.

What Does Wireless Bridge Mean?

Wireless bridge is a term used to describe an electrical or computer network that is powered by a wireless signal.

Takeaway

Best ptp wireless bridge is a great way to increase your networking and encryption abilities without breaking the bank. This bridge comes with a variety of features that make it an valuable addition to your network, and it can be used for both personal and professional needs.

Leave a Comment