A point-to-point wireless bridge is a type of network bridge that connects two discrete LAN segments over a wireless link. Point-to-point wireless bridges are often used in rural areas where wired infrastructure is not available and can be used to provide backhaul for cellular networks.
Our Top Picks At A Glance
Here is a quick recap of our top 10 picks that lets you compare each item with another and allow you to choose the best one.
10 Best Outdoor Point To Point Wireless Bridge 2020 You Should Consider In 2022
- Built in 9dBi 2x2 dual polarized directional MIMO antenna
- Adjustable transmission Power from 0 to 27dBm/500mW. Power Consumption: 10.5 Watts Max, Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable
- System level optimizations for more than 5km long-range wireless transmission (only for paired Point-to-Point or Point-to-MultiPoint transmission)
- TP Link Pharos tdma (Time Division Multiple Access) technology improves product Performance in throughput, Capacity and latency Performance
- Centralized management system Pharos Control
- CPE450 is a 5.8G Long Range WiFi Extender Outdoor Wireless Bridge CPE with an LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional
- 100Mpbs digital display bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability
- Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards(FCC). Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD)， supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable
- Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM
- The FCC ID: 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies: The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ
- The EZ-Bridge-LT+ is a high power outdoor 250mW wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 100 Mb/sec.
- It complies with the 802.11g and n standards to insure interoperability.
- The EZ-Bridge-LT+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight.
- It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access.
- Multiple EZ-Bridge-LT+ units can be connected in a mesh configuration to allow interconnecting more than two sites.
- Easy to Pair: CPE966 Wireless bridge adopts AB automatic networking. Just transfer one end to A as the master bridge and the other end to B as the slave bridge, then you can easily configure it without entering the GUI. This wifi wireless bridge support point-to-point, point-to-multipoint pairing
- High Speed: This outdoor point to point wireless bridge has one Gigabit RJ45 port and a 100Mbps RJ45 port. The transmission speed between the two wifi bridges outdoor is up to 1200Mbps. Through the Gigabit RJ45 port, the maximum wired network speed will be 1000Mbps, Which can better meet your internet speed needs
- 3KM Working Distance: Outdoor wireless bridge is a built-in 16DBi directional antenna, which can significantly improve the signal quality. The actual application transmission distance should be less than 3KM (barrier-free). Trees will not block the transmission speed of a point-to-point internet outdoor CPE
- 5.8G Technology & IP65 Waterproof: Long range wifi bridge using 5.8G IEEE 802.11ac single-band wireless transmission technology, with better anti-interference performance, good compatibility, strong anti-adjacent channel interference, better than 2.4G traditional CPE. This point to point wireless wifi bridge is IP65 waterproof, dustproof, cold-proof, and heat-resistant
- Good Choice for Daily Use: Wifi bridge point to point outdoor can be used wildly in daily life. It not only can help extend your home's network to a second building but also can be used for monitoring. And you can use it in the garage, barn, store, warehouse, farm, and some other place according to your convenience
- 【What CPE120 is】KuWFi CPE120 is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor ethernet bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
- 【Multiple operation mode, for different network environment】 Point to Point/Multi-Point(1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to internet bridge CPE120’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to this give you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR
- 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless ethernet bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance, for building to building wireless wifi bridge
- 【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
- 【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi line of sight wifi bridge and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND
- 【What Is CPE 200】: CPE200 wireless bridge is a 5.8G high-performance,high-speed outdoor long-distance wireless network bridge.The advantage is long transmission distance, strong penetrating ability, and strong anti-interference ability .Point-to-point and point-to-multipoint outdoor coverage and applications without having to layout network cables making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.
- 【5.8G Technology & IP65 Level Waterproof Design】:5.8G frequency using a new generation of 11ac technology is better than 2.4 G traditional CPE. It makes long-range WiFi bridge has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference. Wireless bridge IP65 dustproof and waterproof, lightning protection,and antifreeze,is very suitable for outdoor use.
- 【2-3KM Transmission Distance】:This wifi outdoor bridge built-in 12dBi directional antenna can significantly improve the transmission and reception performance of wireless signals,data rate max up to 900Mbps between the bridge,which supports 2-3KM long-distance wireless transmission.suitable for warehouses, garden,barns, shops, or garages next to your house.
- 【Point to Point Connection for Wireless Transmission】: Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server. It transmits via wireless WiFi, reducing the trouble of wiring cable.
- 【Tips on Product How to Use】：Full information LED display, include host-client mode(H or C,the number behind is the channel number), signal strength(P,a number will be displayed after the pairing is successful), IP address(A), port /wifi/power led, the F button can switch the LED display info, the S button can complete the setting, more clearly know the device status, more conducive to debugging and maintenance.
- UeeVii CPE-452 is an outdoor high power and 5.8G high-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost.
- CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter.
- Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM. Trees will not block the transmission speed of the point-to-point internet wireless bridge, suitable for shop warehouses or garages next to your house.
- Point-to-point bridge easily helps you expand the network range to the second building(barn, shop, warehouses, garages), or wireless extend the IP camera monitoring range. IP65 Level weatherproof shell that ensures continued operation in harsh outdoor environments, very suitable for outdoor use, with rain, dust, and antifreeze characteristics.
- Support PoE power supply (50 meters) power supply, easy to install, and save cost, and compliance with 5.8GHz IEEE 802.11a, IEEE 802.11n standard, support CSMA/CA, CSMA/CD, TCP/IP, PPPoE, DHCP, ICMP, NAT protocol. FCC ID: 2A6EJ-CPE450
- Control your door from anywhere.Connectivity Protocol:wi-fi,bluetooth.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit
- Connect your August Smart Lock to Wi-Fi. Requires North American outlet with 110-240 volt.
- Always know that your door is locked. Requires iOS (9.0 or higher) or Android (5.0 or higher) smartphones
- Lock or unlock your door, even if you are away from home.
- Voice control. Connect your lock to Amazon Alexa, the Google Assistant or Siri.
- INDUSTRIAL-GRADE PLUG-N-PLAY OUTDOOR WIRELESS ETHERNET BRIDGE: The two pre-paired Force 180 5 GHz units use ePTP proprietary protocol to support longer ranges, lower latency and deliver greater performance.
- 10 MILE RANGE WITH UP TO 200 MBPS THROUGHPUT: Quickly support any application requiring network extension. Extend your local network to a remote building or extend your Wi-Fi link to another location.
- COST-EFFECTIVE SOLUTION FOR WIRELESS BACKHAUL: Easily and securely transmit data from CCTV/Security networks and self-install cameras. Our tamper-resistant ePMP units won't back down to interference.
- INTEGRATED SECURITY FEATURES: Built-in 128 bit AES military-grade data encryption and RADIUS-based authentication ensures that your data is always protected when using the wireless bridge system.
- INCLUDES EVERYTHING YOU NEED: Each box contains 2 pre-paired ePMP Force 180 devices with integrated 16 dBi patch antennas and gigabit Ethernet ports, adjustable mounting brackets and set-up instructions.
- Bluedery CPE220 network bridge is a 5.8G Long Range WiFi Extender Outdoor WiFi ethernet bridge with a digital display. It complies with the 802.11a and 802.11n, standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.
- PTMP Pre-programmed: The installation of this WiFi outdoor extender aka long range outdoor wireless access point extender is very simple. Simply connect the both bridges to PoE adapters through the ethernet cables, system will power on, and wait for 1 minute for the both equipment to pair and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired successfully.
- Using 5.8G / 100Mbps wireless transmission rate between wireless ethernet bridge can support 1.2 miles transmission distance (Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
- Long Range WiFi Extender Point to Point Mode: Connect both outdoor WiFi extender to the PoE power adapter will auto pair, no need connects to computer for the complicated configuration, at point-to-point mode can use for long range video surveillance and internet network sharing, the master bridge output WiFi hot point, you can enter password to get access, extend the WiFi access coverage up to 1.2 miles in 60 degrees angle of the front direction.
- Point to Multiple Point Mode: suit for the video surveillance DVR system to receives the IP cameras video stream for different building or place, the master bridge connects to the DVR system, and the slave bridges connects to the IP cameras, This network bridge aka long range WiFi outdoor wireless access point extender can facilitate you manage different building's IP cameras in one system without wiring.
What To Look For Choosing The Best Outdoor Point To Point Wireless Bridge 2020
Before choosing a outdoor point to point wireless bridge 2020, you should take the following considerations into account.
If you’re looking for a outdoorsy way to connect to new friends and share your location, a wireless bridge is the perfect solution. They’re available from point-of-sale firms, online retailers, and even knownrued ones. They start around $30 each, but are usually $1 more expensive. If you’re looking for a bridge that will continue to work even after your card is charged, feel out the products it replaces—the original bridge when I did this had over 3 years left on it. That said, the bridges they’re based on are still the best of the best. If you’re looking for a outdoor wireless bridge, I’d recommend the Montresor product. It’s a good value too, starting at $25.
Related Frequently Asked Questions
How Far Can A Wireless Bridge Reach?
A wireless bridge can reach up to 40 feet.
Can You Connect To A Bridge Wirelessly?
Yes, you can connect to a bridge wirelessly.
What Is Outdoor Wireless Bridge?
The outdoor wireless bridge is a wireless network that connecting devices outside of homes and businesses.
Is A Wireless Access Point The Same As A Bridge?
A wireless access point is a computer system that is connected to the network by an antenna. A bridge is a computer system that is connected to the network by a networking card.
The 2020 Olympic Games are being held in Tokyo, Japan and so the location of the 2020 Olympics is a good one to set up a wireless bridge between two or more devices. The bridge would be built over a highway or other transportation Mataai.